长江经济带城市生态效率演变及驱动因素分析

城市生态文明建设依托于生态效率的改善，基于2005—2016年长江经济带107座城市面板数据，采用超效率SBM（slacks-based measure)模型测算生态效率，并结合探索性空间分析与空间马尔科夫链等探讨生态效率时空演化格局的内在规律， 实证分析生态效率驱动因素的影响效果。研究表明：2005—2016年经济带生态效率总体呈平稳态势，上、中、下游呈现“阶梯型”分布，下游依次优于中游和上游地区，部分地区生态效率呈“两级型”分化趋势；城市间生态效率发展存在空间联动效应，与生态效率高的城市为邻，其正向溢出作用促进城市状态向高水平跃迁，而与生态效率低的城市为邻，其负向作用拉动城市状态向低水平发展；人口规模与产业升级对经济带不同流域具有异质性作用，其提升下游生态效率而抑制中游和上游生态效率，产业升级与生态效率存在“U”型关联，意味着产业升级在短期内并不能使生态效率状态改善，而经济发展有利于促进生态效率向高水平状态演变。     

超高强7055铝合金铸锭均匀化工艺优化

采用光学显微镜、扫描电镜、差热分析及透射电镜等手段,对一种航空用超高强7055铝合金大尺寸铸锭的均匀化工艺进行分析与优化。提出分级提高均匀化温度的方法,在确保不发生过烧的情况下,最大限度改善铸锭质量。结果显示:低温预均匀化时,铸锭中析出大量的Al₃Zr相,能够大幅度降低对后续挤压变形的再结晶比例;对铸锭采用400 ℃×4 h+465 ℃×16 h+474 ℃×8 h的分级均匀化处理工艺,能够显著消除铸锭中低熔点相的含量,提高铸锭质量,同时相比于原工艺节省约13 h。新的均匀化处理工艺,不仅提高了生产效率,还能够为后续工艺提供良好的铸锭。     

帕金森氏病关联miRNAs的功能和调控

帕金森病（Parkinson's disease, PD）是一种老年期常见的神经系统退行性疾病，致病过程复杂，其发病机制尚未明确，目前普遍认为帕金森病的发生与环境、遗传和年龄等多个因素有关。microRNAs（miRNAs）是一种内源性的小分子非编码RNAs，在转录后水平调控人类基因组中约1/3的基因。大量研究表明，帕金森病与miRNAs存在密切关联，在PD的发生发展、诊断甚至治疗过程中起到重要作用。本综述讨论了最近研究报道的和帕金森病相关的miRNAs，并分析了miRNAs的特异性表达在帕金森病的致病机制和诊断中发挥的作用。     

Catalytic combustion of methane over a highly active and stable NiO/CeO2 catalyst

In the last decades, many reports dealing with technology for the catalytic combustion of methane (CH₄) have been published. Recently, attention has increasingly focused on the synthesis and catalytic activity of nickel oxides. In this paper, a NiO/CeO₂ catalyst with high catalytic performance in methane combustion was synthesized via a facile impregnation method, and its catalytic activity, stability, and water-resistance during CH₄ combustion were investigated. X-ray diffraction, low-temperature N₂ adsorption, thermogravimetric analysis, Fourier transform infrared spectroscopy, hydrogen temperature programmed reduction, methane temperature programmed surface reaction, Raman spectroscopy, electron paramagnetic resonance, and transmission electron microscope characterization of the catalyst were conducted to determine the origin of its high catalytic activity and stability in detail. The incorporation of NiO was found to enhance the concentration of oxygen vacancies, as well as the activity and amount of surface oxygen. As a result, the mobility of bulk oxygen in CeO₂ was increased. The presence of CeO₂ prevented the aggregation of NiO, enhanced reduction by NiO, and provided more oxygen species for the combustion of CH₄. The results of a kinetics study indicated that the reaction order was about 1.07 for CH₄ and about 0.10 for O₂ over the NiO/CeO₂ catalyst.     

Standing Surface Acoustic Wave (SSAW)‐Based Fluorescence‐Activated Cell Sorter

Microfluidic fluorescence‐activated cell sorters (μFACS) have attracted considerable interest because of their ability to identify and separate cells in inexpensive and biosafe ways. Here a high‐performance μFACS is presented by integrating a standing surface acoustic wave (SSAW)‐based, 3D cell‐focusing unit, an in‐plane fluorescent detection unit, and an SSAW‐based cell‐deflection unit on a single chip. Without using sheath flow or precise flow rate control, the SSAW‐based cell‐focusing technique can focus cells into a single file at a designated position. The tight focusing of cells enables an in‐plane‐integrated optical detection system to accurately distinguish individual cells of interest. In the acoustic‐based cell‐deflection unit, a focused interdigital transducer design is utilized to deflect cells from the focused stream within a minimized area, resulting in a high‐throughput sorting ability. Each unit is experimentally characterized, respectively, and the integrated SSAW‐based FACS is used to sort mammalian cells (HeLa) at different throughputs. A sorting purity of greater than 90% is achieved at a throughput of 2500 events s^?1. The SSAW‐based FACS is efficient, fast, biosafe, biocompatible and has a small footprint, making it a competitive alternative to more expensive, bulkier traditional FACS.     

工程配套小型石料矿山复杂环境开采爆破技术

建设工程配套石料矿山相比传统以取得矿产品为目的的采石场具有周边环境复杂、施工强度高、全寿命周期短、工程质量要求灵活多变、爆破安全警戒工作量大等特点。以普陀区六横岛中远船务二期工程石料（宕渣）矿爆破开采工程为例，介绍了该类矿山开采爆破的设计施工技术要点及施工经验，有效解决了建设工程配套小型石料矿山复杂环境开采爆破存在的一些问题，对于类似工程实践有一定的借鉴价值。     

过粉碎对选矿生产的影响#br#

目前的过粉碎研究过分强调对选别的影响，提出了对过粉碎的影响研究应更全面，通过实例说明过粉碎对磨矿分级等作业的影响甚至不亚于对选别的影响。     

某船用柴油机排气管路流-固耦合计算与保温效果研究

对某船用柴油机排气管路的流动与传热过程开展流-固耦合仿真分析。结果表明:受排气管路结构影响，管内流动方向和流速发生变化，局部区域产生明显的回流现象；排气管路外表面温度分布差异较大，平均温度高达534 ℃。为达到柴油机安全设计要求，在排气管路外壁敷设保温材料。分析结果表明:气凝胶纳米材料的保温效果优于硅酸铝纤维材料，在相同的运行条件和使用要求下，气凝胶纳米材料的敷设厚度更薄。     

A multi-material part design framework in additive manufacturing

Additive manufacturing (AM) technologies provide more freedom to functional part design in various industries. One of the unique capabilities of AM is that multi-material parts can be produced with material compositional and geometric complexity. Multi-material parts have the advantage of achieving multiple performance requirements. In the research, we propose a framework for designing multi-material parts using AM processes. The proposed framework is composed of four interacting modules, including design requirement identification, primary material selection, AM process selection, material composition, and part geometry determination. Rules and guidelines for AM are integrated into the proposed framework with AM processes’ capabilities and constraints compiled in databases. We also introduce databases to assist in decision-making and ensure manufacturability of the designed multi-material part in various product design phases. The proposed framework is applied to a case study involving a conceptual design of a multi-material battery pack cooling plate.